Full Generic wiring loom (harness) for Emerald ECU - 6 cylinder

SKU:02-038

Generic loom - is a loom with generic length of wires providing basic connections only. If there is no option in bellow questioner to accommodate your requirements please contact us for custom harness.

Emerald full generic wiring harness for 6 cylinder engines – In house designed and assembled with high quality automotive materials to provide ease of installation and flexibility for a wide variety of 6 cylinder engines in conjunction with our standalone ECU. Available for both, K3 ECU and K6 ECU. All wires are twisted to avoid any possible interference and labeled for easy installation.

The wiring loom is available in a variety of base configurations:

* Inductive crank sensor
* Inductive crank & cam sensors
* Digital crank sensor
* Inductive crank sensor & digital cam sensor
* Digital crank sensor & inductive cam sensor
* Digital crank sensor & digital cam sensor

and two options of Injectors layout:

* I line (all injectors in one straight row)
* U line (injectors on two sides. 3 on each side)

Standardised lengths (shown from ECU to connection):

* Crank sensor wires (shielded), unterminated - 1700mm
* Cam sensor wires (shielded), unterminated - 1700mm
* Coil Pack wires, unterminated - 1850mm
* Fuel Injector wires, I line, junior timer or EV6 connectors:
Inj. 6 - 1550mm
Inj. 5 - 1650mm
Inj. 4 - 1750mm
Inj. 3 - 1850mm
Inj. 2 - 1950mm
Inj. 1 - 2050mm
* Fuel Injector wires, U line, junior timer or EV6 connectors:
Inj. 6 - 1550mm
Inj. 5 - 1650mm
Inj. 4 - 1750mm
Inj. 3 - 2350mm
Inj. 2 - 2450mm
Inj. 1 - 2550mm
* Air temp sensor wires, junior timer connectors - 2000mm
* Coolant temp sensor wires, junior timer connectors - 2000mm
* MAP sensor wires, unterminated - 2000mm
* TPS sensor wires, unterminated - 2000mm
* Lambda sensor wires, unterminated - 1960mm
* Main Relay - 530mm
* Fuel Pump Relay wire, unterminated - 2000mm
* Cooling Fan wire, unterminated - 2000mm
* Shift-light, unterminated - 1850mm
* Tacho Driver wire, unterminated - 1850mm
* Battery +12v wire, unterminated- 1700mm
* Earth wire, unterminated - 1700mm

The majority of sensor and output wires are supplied unterminated so that wire length can be trimmed and connectors of your choice fitted as required.

Various suitable connectors are available from "Connectors" section of our Shop.

If you wish we can preinstall them for you. Simply select the right options below.

Please check your requirements before ordering. If any details above are not satisfactory please contact us for customisation. Full custom looms also available. E-mail us at sales@emeraldm3d.co.uk or call on +44 (0) 1953 889110 and we will do our best to provide you with a solution.

Please note that this loom is made to order and may take longer to ship.

Email to a Friend

Availability: In stock

Excl. Tax: £220.00 Incl. Tax: £264.00