Search results for 'loom connector'
-
Amphenol ATM (Deutsch DTM) connectors and terminals
SKU:02-ATM-Deutsch
Starting at: Excl. Tax: £1.90 Incl. Tax: £2.28
Variety of Deutsch DTM/Amphenol ATM compatible connectors and pins. Learn More -
Deutsch DT connectors and pins.
SKU:02-DT-Deutsch
Starting at: Excl. Tax: £1.90 Incl. Tax: £2.28
Variety of Deutsch DT connectors and pins. Learn More -
Gen2 4-cylinder coil pack connector pins & seals
SKU:02-245
Excl. Tax: £5.00 Incl. Tax: £6.00Terminals and seals to fit Gen2 4-cylinder connector. Learn More -
Gen2 6-cylinder coil pack connector pins & seals
SKU:02-247
Excl. Tax: £5.00 Incl. Tax: £6.00Terminals and seals to fit Gen2 6-cylinder connector. Learn More -
VW/Audi 4-pin coil connector
SKU:02-188
Excl. Tax: £5.50 Incl. Tax: £6.60VW/Audi 4-pin coil connector with pins and seals. Learn More -
ECU 36-way male onboard connector
SKU:02-181
Excl. Tax: £15.00 Incl. Tax: £18.00ECU ECU 36-way male onboard connector. Learn More -
Emerald ECU to OBD, Serial port and 2 CAN breakout loom/adapter.
SKU:02-180
Excl. Tax: £34.50 Incl. Tax: £41.40Emerald ECU to OBD and serial port breakout loom/adapter for connecting OBD devices to the K3 or K6 ECU. Allows for OBD and PC serial links at the same time. Learn More -
2-pin Metri-pack 150.2 connector
SKU:02-063
Excl. Tax: £2.95 Incl. Tax: £3.542-pin Metri-pack 150.2 connector with terminals. Learn More -
3-pin Metri-pak connector pre-wired for Honeywell map sensor
SKU:02-177
Excl. Tax: £6.00 Incl. Tax: £7.203-pin Metri-pak connector for Honeywell MAP sensor pre-terminated on 50cm of wire. Learn More -
3-pin Metri-pak connector for Honeywell map sensor
SKU:02-074
Excl. Tax: £4.50 Incl. Tax: £5.403-pin Metri-pak connector for Honeywell MAP sensor. Learn More -
Aptiv (Delphi) pins for Marelli Magneti IACV connector. Pack of 10.
SKU:02-153
Excl. Tax: £3.00 Incl. Tax: £3.60Magneti Marelli pins Learn More -
5-pin Power Timer connector kit
SKU:02-152
Excl. Tax: £4.90 Incl. Tax: £5.885-pin Power Timer connector kit. Learn More -
DBW flying lead looms on ECU plugs - open ends for sensors, etc
SKU:02-fly-DBW
Starting at: Excl. Tax: £75.00 Incl. Tax: £90.00
Drive by wire flying lead looms on ECU plugs – 3 meters long with unterminated ends so a wide variety of connectors/sensors can be fitted. Mandatory wires are pre-installed into the ECU plug, all other wires are supplied, pre-terminated at the ECU end, for you to select and install as per your engine's requirements. Learn More -
Superseal 6-pin socket connector inc pins
SKU:02-077
Excl. Tax: £4.30 Incl. Tax: £5.16Superseal 6-pin socket connector including pins. Learn More -
Superseal 5-pin socket connector inc pins
SKU:02-011
Excl. Tax: £3.70 Incl. Tax: £4.44Superseal 5-pin socket connector including pins. Learn More -
2-pin Junior mini timer male connector
SKU:02-008
Excl. Tax: £3.10 Incl. Tax: £3.722-pin Junior mini timer male connector for various connections. Learn More -
Pin removing tool for Emerald ECU connector
SKU:02-076
Excl. Tax: £3.20 Incl. Tax: £3.84For easy removal of pins from 36-way Econoseal connector. Supplied with instructions. Learn More -
Emerald ECU to CAN/Serial breakout loom
SKU:02-068
Excl. Tax: £24.50 Incl. Tax: £29.40To allow simultaneous connection of Comms lead and CAN bus enabled devices to our ECU. Learn More -
3-pin Junior mini timer male connector
SKU:02-007
Excl. Tax: £3.50 Incl. Tax: £4.203-pin Junior mini timer male connector for various connections. Learn More -
4-pin Metri-pack connector for Webcon and Magneti Marelli Idle Air Control Valve
SKU:02-060
Excl. Tax: £5.20 Incl. Tax: £6.244-pin Metri-pack connector for Webcon and Magneti Marelli Idle Air Control Valve. Learn More
