Search results for '2'
-
LSU 4.9 wideband lambda extension
SKU:01-lam-ext
Starting at: Excl. Tax: £25.00 Incl. Tax: £30.00
Extension for use with LSU 4.9 wideband lambda sensor. Compatible with our Bosh or 14Point7 sensors. Learn More -
Ford VVT/Temperature sensor 2-pin plug with pins, seals and lock
SKU:02-275
Excl. Tax: £4.10 Incl. Tax: £4.92Ford VVT/Temperature sensor 2-pin plug with pins, seals and lock. Learn More -
Amphenol ATM (Deutsch DTM) connectors and terminals
SKU:02-ATM-Deutsch
Starting at: Excl. Tax: £1.90 Incl. Tax: £2.28
Variety of Deutsch DTM/Amphenol ATM compatible connectors and pins. Learn More -
Deutsch DT connectors and pins.
SKU:02-DT-Deutsch
Starting at: Excl. Tax: £1.90 Incl. Tax: £2.28
Variety of Deutsch DT connectors and pins. Learn More -
Bosch LSU 4.9 wideband lambda sensor
SKU:01-101
Excl. Tax: £72.00 Incl. Tax: £86.40Genuine Bosch LSU 4.9 wideband lambda sensor compatible with 14point7 wideband controller. Learn More -
Gen2 4-cylinder coil pack connector pins & seals
SKU:02-245
Excl. Tax: £5.00 Incl. Tax: £6.00Terminals and seals to fit Gen2 4-cylinder connector. Learn More -
Gen2 6-cylinder coil pack connector pins & seals
SKU:02-247
Excl. Tax: £5.00 Incl. Tax: £6.00Terminals and seals to fit Gen2 6-cylinder connector. Learn More -
Emerald's Jaguar V12 IACV Conversion kit (OE Manifold)
SKU:01-023
Excl. Tax: £135.00 Incl. Tax: £162.00Out of stock
Jaguar V12 IACV Conversion kit (OE Manifold). Learn More -
VW/Audi 4-pin coil connector
SKU:02-188
Excl. Tax: £5.50 Incl. Tax: £6.60VW/Audi 4-pin coil connector with pins and seals. Learn More -
Webcon billet adjustable fuel pressure regulator 0-5 bar
SKU:04-webconfpr
Starting at: Excl. Tax: £105.30 Incl. Tax: £126.36
Webcon adjustable billet fuel pressure regulator, 0-5 bar, push on or JIC-6 fittings. Learn More -
Ford Zetec 2.0L intake manifold gasket
SKU:06-084
Excl. Tax: £37.00 Incl. Tax: £44.40Ford Zetec 2.0L intake manifold gasket. Learn More -
Black Bullet Fuel Filter Jic6 with mounting clips, 10 Micron
SKU:04-052
Excl. Tax: £63.09 Incl. Tax: £75.71SYTEC Bullet High Flow Jic6 (Black) designed for in line application. These filters have a flow capacity of 500 Ltr/Hr and are capable of handling up to 10 Bar pressure. These filters are designed for use in either a Pre or Post fuel pump format and in both carburettor (Low Pressure) or fuel injection (High Pressure) fuel systems. Learn More -
ECU 36-way male onboard connector
SKU:02-181
Excl. Tax: £15.00 Incl. Tax: £18.00ECU ECU 36-way male onboard connector. Learn More -
Hi OTP017 Out-Tank Fuel Injection Pump (3 Bar)
SKU:04-012
Excl. Tax: £59.62 Incl. Tax: £71.54Hi OTP017 Out-Tank Fuel Injection Pump. Learn More -
Breather filter BF-19
SKU:07-030
Excl. Tax: £25.00 Incl. Tax: £30.00ITG foam crankcase breather. Fits on 19mm diameter tube. Includes retaining clip. Learn More -
ST170 Jenvey Manifold Ford Zetec TB45
SKU:06-082
Excl. Tax: £313.95 Incl. Tax: £376.74Pre-machined to fit ST170 engines. An inlet manifold to mount TB style throttle bodies to a Ford Zetec engine- not suitable for Carburettors due to angle. Learn More -
Emerald ECU to OBD, Serial port and 2 CAN breakout loom/adapter.
SKU:02-180
Excl. Tax: £34.50 Incl. Tax: £41.40Emerald ECU to OBD and serial port breakout loom/adapter for connecting OBD devices to the K3 or K6 ECU. Allows for OBD and PC serial links at the same time. Learn More -
2-pin Metri-pack 150.2 connector
SKU:02-063
Excl. Tax: £2.95 Incl. Tax: £3.542-pin Metri-pack 150.2 connector with terminals. Learn More -
Bracket for Honeywell MAP sensor
SKU:02-178
Excl. Tax: £5.00 Incl. Tax: £6.00Bracket for Honeywell MAP sensor Learn More -
3-pin Metri-pak connector pre-wired for Honeywell map sensor
SKU:02-177
Excl. Tax: £6.00 Incl. Tax: £7.203-pin Metri-pak connector for Honeywell MAP sensor pre-terminated on 50cm of wire. Learn More
