Search results for '5 cylinder'
-
6mm2 Uninsulated (butt) through crimp terminals.
SKU:02-151
Excl. Tax: £0.40 Incl. Tax: £0.486mm2 Uninsulated (butt) through crimp terminals. Learn More -
6mm2 Uninsulated female spade terminals. Pack of 10.
SKU:02-150
Excl. Tax: £1.50 Incl. Tax: £1.80Pack of 10 - 6mm2 cable/ 6.3mm blade uninsulated female spade terminals. Learn More -
2.5mm2 Uninsulated female spade terminals. Pack of 10.
SKU:02-149
Excl. Tax: £0.75 Incl. Tax: £0.90Pack of 10 - 2.5mm2 cable/ 6.3mm blade uninsulated female spade terminals. Learn More -
2-way Dashboard map switch with button
SKU:05-map-switch-button
Starting at: Excl. Tax: £34.00 Incl. Tax: £40.80
2-way Dashboard switch with knob, prewired with ECU aux port plug, resistor and push button for 3rd map selection. Learn More -
2-way Dashboard switch with key
SKU:05-map-switch-key
Starting at: Excl. Tax: £30.00 Incl. Tax: £36.00
2-way Dashboard switch with knob, prewired with resistor, ECU aux port plug, plus "Key switch" selection of 3rd map. Learn More -
3-way Dashboard switch prewired with ECU aux port plug
SKU:05-map-switch
Starting at: Excl. Tax: £24.00 Incl. Tax: £28.80
Quality 3-way Dashboard switch prewired with ECU aux port plug. Learn More -
Emerald K6 ECU P&P adapter - EU3 non VVC
SKU:02-148
Excl. Tax: £145.00 Incl. Tax: £174.00Emerald K6 ECU Plug & Play adapter - EU3. Learn More -
DBW flying lead looms on ECU plugs - open ends for sensors, etc
SKU:02-fly-DBW
Starting at: Excl. Tax: £75.00 Incl. Tax: £90.00
Drive by wire flying lead looms on ECU plugs – 3 meters long with unterminated ends so a wide variety of connectors/sensors can be fitted. Mandatory wires are pre-installed into the ECU plug, all other wires are supplied, pre-terminated at the ECU end, for you to select and install as per your engine's requirements. Learn More -
Superseal 5-pin male plug with pins
SKU:02-042
Excl. Tax: £3.70 Incl. Tax: £4.44Superseal 5-pin male connector including pins. Learn More -
Superseal 5-pin socket connector inc pins
SKU:02-011
Excl. Tax: £3.70 Incl. Tax: £4.44Superseal 5-pin socket connector including pins. Learn More -
Emerald K6 ECU P&P adapter - VR6 (2.8 AAA, 2.9 ABV)
SKU:02-073
Excl. Tax: £145.00 Incl. Tax: £174.00Emerald K6 ECU Plug & Play adapter - VR6 (2.8 AAA, 2.9 ABV) Learn More -
Emerald K6 ECU P&P adapter - Ford ST150
SKU:02-030
Excl. Tax: £145.00 Incl. Tax: £174.00Emerald K6 ECU Plug & Play adapter - Ford ST150 Learn More -
Emerald K6 ECU P&P adapter - Ford 1.6/1.7 VVT
SKU:02-072
Excl. Tax: £145.00 Incl. Tax: £174.00Emerald K6 ECU Plug & Play adapter - Ford 1.6/1.7 VVT Learn More -
Jenvey Aluminium Air Horns for Heritage body
SKU:06-heritage-air-horns
Starting at: Excl. Tax: £45.00 Incl. Tax: £54.00
An aluminium spun air horn designed to suit the Jenvey Heritage Throttle Bodies with a retro look. These air horns available in variety of sizes with fixing bolts and schnoor locking washers. These are very light air horns! Learn More -
Heritage Twin Throttle Body 40 to 48mm Triple
SKU:06-074
Excl. Tax: £2,098.95 Incl. Tax: £2,518.74The Jenvey Heritage DCOE throttle body comes in TDT40 , TDT45 , TDT48 mm bore options. This is a triple twin throttle body set up to suit 6 cylinder engines. It includes a built in fuel rail, 350CC injectors, extension looms to bring the injector connector to the underside of the throttle body and a hidden internal throttle position sensor. Learn More -
Heritage Twin Throttle Body 40 to 48mm Single
SKU:06-072
Excl. Tax: £854.00 Incl. Tax: £1,024.80The Jenvey Heritage DCOE throttle body comes in TDS40 , TDS45 , TDS48 mm bore options. This is a single twin throttle body set up to suit 2 cylinder engines. It includes a built in fuel rail, 350CC injectors, extension looms to bring the injector connector to the underside of the throttle body and a hidden internal throttle position sensor. Learn More -
Emerald K6 ECU P&P adapter - R32 (ME 7.1.1, DBW)
SKU:02-071
Excl. Tax: £145.00 Incl. Tax: £174.00Out of stock
Emerald K6 ECU Plug & Play adapter - R32 (ME 7.1.1, DBW) Learn More -
Emerald K6 ECU P&P adapter - 1.8T (ME 7.5, DBW)
SKU:02-070
Excl. Tax: £145.00 Incl. Tax: £174.00A plug and play adapter to allow direct fitment of our K6 ECU to 1.8T (ME 7.5, DBW) engined cars. Learn More -
FSE Fuel Pressure Gauge Adapter
SKU:04-050
Excl. Tax: £13.67 Incl. Tax: £16.40Fuel Pressure Gauge Adapter 100 Learn More -
Throttle cable 1.5 meter SKU:06-070
SKU:06-070
Excl. Tax: £12.00 Incl. Tax: £14.40Out of stock
Jenvey throttle cable 1.5 metre length. Learn More
