Search results for 'k series vvc'
-
Air Control Valve kit 6 Ports
SKU:06-079
Excl. Tax: £86.00 Incl. Tax: £103.20A kit of parts to adapt from a 19mm pipe to supply idle air to set of 3 twin throttle bodies or any six port manifold with suitable tapping's. Learn More -
Black Bullet Fuel Filter 8mm - 8mm (push on) with mounting clips, 10 Micron
SKU:04-051
Excl. Tax: £55.06 Incl. Tax: £66.07SYTEC Bullet High Flow 8mm-8mm (Black) designed for in line application. These filters have a flow capacity of 500 Ltr/Hr and are capable of handling up to 10 Bar pressure. These filters are designed for use in either a Pre or Post fuel pump format and in both carburettor (Low Pressure) or fuel injection (High Pressure) fuel systems. Learn More -
2-pin Metri-pack 150.2 connector
SKU:02-063
Excl. Tax: £2.95 Incl. Tax: £3.542-pin Metri-pack 150.2 connector with terminals. Learn More -
Bracket for Honeywell MAP sensor
SKU:02-178
Excl. Tax: £5.00 Incl. Tax: £6.00Bracket for Honeywell MAP sensor Learn More -
3-pin Metri-pak connector pre-wired for Honeywell map sensor
SKU:02-177
Excl. Tax: £6.00 Incl. Tax: £7.203-pin Metri-pak connector for Honeywell MAP sensor pre-terminated on 50cm of wire. Learn More -
3-pin Metri-pak connector for Honeywell map sensor
SKU:02-074
Excl. Tax: £4.50 Incl. Tax: £5.403-pin Metri-pak connector for Honeywell MAP sensor. Learn More -
Timer pins. Pack of 10.
SKU:02-174
Excl. Tax: £2.50 Incl. Tax: £3.00Terminals for use with 2-pin and 3-pin Timer connectors. Learn More -
Aptiv (Delphi) pins for Marelli Magneti IACV connector. Pack of 10.
SKU:02-153
Excl. Tax: £3.00 Incl. Tax: £3.60Magneti Marelli pins Learn More -
Blanking seal / Cavity plug
SKU:09-094
Excl. Tax: £3.40 Incl. Tax: £4.08Blanking seals/Cavity plugs for use with our ECU connector. Learn More -
5-pin Power Timer connector kit
SKU:02-152
Excl. Tax: £4.90 Incl. Tax: £5.885-pin Power Timer connector kit. Learn More -
6mm2 Uninsulated female spade terminals. Pack of 10.
SKU:02-150
Excl. Tax: £1.50 Incl. Tax: £1.80Pack of 10 - 6mm2 cable/ 6.3mm blade uninsulated female spade terminals. Learn More -
2.5mm2 Uninsulated female spade terminals. Pack of 10.
SKU:02-149
Excl. Tax: £0.75 Incl. Tax: £0.90Pack of 10 - 2.5mm2 cable/ 6.3mm blade uninsulated female spade terminals. Learn More -
2-way Dashboard map switch with button
SKU:05-map-switch-button
Starting at: Excl. Tax: £34.00 Incl. Tax: £40.80
2-way Dashboard switch with knob, prewired with ECU aux port plug, resistor and push button for 3rd map selection. Learn More -
2-way Dashboard switch with key
SKU:05-map-switch-key
Starting at: Excl. Tax: £30.00 Incl. Tax: £36.00
2-way Dashboard switch with knob, prewired with resistor, ECU aux port plug, plus "Key switch" selection of 3rd map. Learn More -
3-way Dashboard switch prewired with ECU aux port plug
SKU:05-map-switch
Starting at: Excl. Tax: £24.00 Incl. Tax: £28.80
Quality 3-way Dashboard switch prewired with ECU aux port plug. Learn More -
Emerald K6 ECU P&P adapter - EU3 non VVC
SKU:02-148
Excl. Tax: £145.00 Incl. Tax: £174.00Emerald K6 ECU Plug & Play adapter - EU3. Learn More -
DBW flying lead looms on ECU plugs - open ends for sensors, etc
SKU:02-fly-DBW
Starting at: Excl. Tax: £75.00 Incl. Tax: £90.00
Drive by wire flying lead looms on ECU plugs – 3 meters long with unterminated ends so a wide variety of connectors/sensors can be fitted. Mandatory wires are pre-installed into the ECU plug, all other wires are supplied, pre-terminated at the ECU end, for you to select and install as per your engine's requirements. Learn More -
Superseal 6-pin socket connector inc pins
SKU:02-077
Excl. Tax: £4.30 Incl. Tax: £5.16Superseal 6-pin socket connector including pins. Learn More -
Superseal 5-pin socket connector inc pins
SKU:02-011
Excl. Tax: £3.70 Incl. Tax: £4.44Superseal 5-pin socket connector including pins. Learn More -
Emerald K6 ECU P&P adapter - VR6 (2.8 AAA, 2.9 ABV)
SKU:02-073
Excl. Tax: £145.00 Incl. Tax: £174.00Emerald K6 ECU Plug & Play adapter - VR6 (2.8 AAA, 2.9 ABV) Learn More
