Search results for '4'
-
Injector ballast resistor 2.7 Ohm
SKU:04-003
Excl. Tax: £3.50 Incl. Tax: £4.20Injector ballast resistor 2.7 Ohm. Learn More -
Timer pins. Pack of 10.
SKU:02-174
Excl. Tax: £2.50 Incl. Tax: £3.00Terminals for use with 2-pin and 3-pin Timer connectors. Learn More -
Blanking seal / Cavity plug
SKU:09-094
Excl. Tax: £3.40 Incl. Tax: £4.08Blanking seals/Cavity plugs for use with our ECU connector. Learn More -
5-pin Power Timer connector kit
SKU:02-152
Excl. Tax: £4.90 Incl. Tax: £5.885-pin Power Timer connector kit. Learn More -
6mm2 Uninsulated (butt) through crimp terminals.
SKU:02-151
Excl. Tax: £0.40 Incl. Tax: £0.486mm2 Uninsulated (butt) through crimp terminals. Learn More -
2.5mm2 Uninsulated female spade terminals. Pack of 10.
SKU:02-149
Excl. Tax: £0.75 Incl. Tax: £0.90Pack of 10 - 2.5mm2 cable/ 6.3mm blade uninsulated female spade terminals. Learn More -
2-way Dashboard map switch with button
SKU:05-map-switch-button
Starting at: Excl. Tax: £34.00 Incl. Tax: £40.80
2-way Dashboard switch with knob, prewired with ECU aux port plug, resistor and push button for 3rd map selection. Learn More -
2-way Dashboard switch with key
SKU:05-map-switch-key
Starting at: Excl. Tax: £30.00 Incl. Tax: £36.00
2-way Dashboard switch with knob, prewired with resistor, ECU aux port plug, plus "Key switch" selection of 3rd map. Learn More -
3-way Dashboard switch prewired with ECU aux port plug
SKU:05-map-switch
Starting at: Excl. Tax: £24.00 Incl. Tax: £28.80
Quality 3-way Dashboard switch prewired with ECU aux port plug. Learn More -
Emerald K6 ECU P&P adapter - EU3 non VVC
SKU:02-148
Excl. Tax: £145.00 Incl. Tax: £174.00Emerald K6 ECU Plug & Play adapter - EU3. Learn More -
DBW flying lead looms on ECU plugs - open ends for sensors, etc
SKU:02-fly-DBW
Starting at: Excl. Tax: £75.00 Incl. Tax: £90.00
Drive by wire flying lead looms on ECU plugs – 3 meters long with unterminated ends so a wide variety of connectors/sensors can be fitted. Mandatory wires are pre-installed into the ECU plug, all other wires are supplied, pre-terminated at the ECU end, for you to select and install as per your engine's requirements. Learn More -
Superseal 6-pin male plug with pins
SKU:02-078
Excl. Tax: £4.30 Incl. Tax: £5.16Out of stock
Superseal 6-pin male connector including pins. Learn More -
Superseal 6-pin socket connector inc pins
SKU:02-077
Excl. Tax: £4.30 Incl. Tax: £5.16Superseal 6-pin socket connector including pins. Learn More -
Superseal 5-pin male plug with pins
SKU:02-042
Excl. Tax: £3.70 Incl. Tax: £4.44Superseal 5-pin male connector including pins. Learn More -
Emerald K6 ECU P&P adapter - VR6 (2.8 AAA, 2.9 ABV)
SKU:02-073
Excl. Tax: £145.00 Incl. Tax: £174.00Emerald K6 ECU Plug & Play adapter - VR6 (2.8 AAA, 2.9 ABV) Learn More -
Emerald K6 ECU P&P adapter - Ford ST150
SKU:02-030
Excl. Tax: £145.00 Incl. Tax: £174.00Emerald K6 ECU Plug & Play adapter - Ford ST150 Learn More -
Emerald K6 ECU P&P adapter - Ford 1.6/1.7 VVT
SKU:02-072
Excl. Tax: £145.00 Incl. Tax: £174.00Emerald K6 ECU Plug & Play adapter - Ford 1.6/1.7 VVT Learn More -
Jenvey Aluminium Air Horns for Heritage body
SKU:06-heritage-air-horns
Starting at: Excl. Tax: £45.00 Incl. Tax: £54.00
An aluminium spun air horn designed to suit the Jenvey Heritage Throttle Bodies with a retro look. These air horns available in variety of sizes with fixing bolts and schnoor locking washers. These are very light air horns! Learn More -
Heritage Twin Throttle Body 40 to 48mm Triple
SKU:06-074
Excl. Tax: £2,098.95 Incl. Tax: £2,518.74The Jenvey Heritage DCOE throttle body comes in TDT40 , TDT45 , TDT48 mm bore options. This is a triple twin throttle body set up to suit 6 cylinder engines. It includes a built in fuel rail, 350CC injectors, extension looms to bring the injector connector to the underside of the throttle body and a hidden internal throttle position sensor. Learn More -
Heritage Twin Throttle Body 40 to 48mm Pair
SKU:06-073
Excl. Tax: £1,494.00 Incl. Tax: £1,792.80The Jenvey Heritage DCOE throttle body comes in TDP40 , TDP45 , TDP48 mm bore options. This is a pair of twin throttle body set up to suit 4 cylinder engines. It includes a built in fuel rail, 350CC injectors, extension looms to bring the injector connector to the underside of the throttle body and a hidden internal throttle position sensor. Learn More
