Search results for '1'
-
2-way Dashboard switch with key
SKU:05-map-switch-key
Starting at: Excl. Tax: £30.00 Incl. Tax: £36.00
2-way Dashboard switch with knob, prewired with resistor, ECU aux port plug, plus "Key switch" selection of 3rd map. Learn More -
2-way Dashboard map switch with button
SKU:05-map-switch-button
Starting at: Excl. Tax: £34.00 Incl. Tax: £40.80
2-way Dashboard switch with knob, prewired with ECU aux port plug, resistor and push button for 3rd map selection. Learn More -
2.5mm2 Uninsulated female spade terminals. Pack of 10.
SKU:02-149
Excl. Tax: £0.75 Incl. Tax: £0.90Pack of 10 - 2.5mm2 cable/ 6.3mm blade uninsulated female spade terminals. Learn More -
6mm2 Uninsulated female spade terminals. Pack of 10.
SKU:02-150
Excl. Tax: £1.50 Incl. Tax: £1.80Pack of 10 - 6mm2 cable/ 6.3mm blade uninsulated female spade terminals. Learn More -
6mm2 Uninsulated (butt) through crimp terminals.
SKU:02-151
Excl. Tax: £0.40 Incl. Tax: £0.486mm2 Uninsulated (butt) through crimp terminals. Learn More -
5-pin Power Timer connector kit
SKU:02-152
Excl. Tax: £4.90 Incl. Tax: £5.885-pin Power Timer connector kit. Learn More -
Blanking seal / Cavity plug
SKU:09-094
Excl. Tax: £3.40 Incl. Tax: £4.08Blanking seals/Cavity plugs for use with our ECU connector. Learn More -
Aptiv (Delphi) pins for Marelli Magneti IACV connector. Pack of 10.
SKU:02-153
Excl. Tax: £3.00 Incl. Tax: £3.60Magneti Marelli pins Learn More -
Wideband lambda (controller only)
SKU:01-097
Excl. Tax: £75.00 Incl. Tax: £90.00Out of stock
Wideband lambda controller only Learn More -
Timer pins. Pack of 10.
SKU:02-174
Excl. Tax: £2.50 Incl. Tax: £3.00Terminals for use with 2-pin and 3-pin Timer connectors. Learn More -
3-pin Timer boot
SKU:02-176
Excl. Tax: £1.50 Incl. Tax: £1.80Rubber boot for use with 3-pin Timer connector. Learn More -
2-pin Timer boot
SKU:02-175
Excl. Tax: £1.00 Incl. Tax: £1.20Rubber boot for use with 2-pin Timer connector. Learn More -
Injector ballast resistor 2.7 Ohm
SKU:04-003
Excl. Tax: £3.50 Incl. Tax: £4.20Injector ballast resistor 2.7 Ohm. Learn More -
Honeywell 3.44Bar MAP sensor
SKU:02-053
Excl. Tax: £63.50 Incl. Tax: £76.20Honeywell Manifold Absolute Pressure (MAP) sensor - 3.44Bar. Learn More -
3-pin Metri-pak connector for Honeywell map sensor
SKU:02-074
Excl. Tax: £4.50 Incl. Tax: £5.403-pin Metri-pak connector for Honeywell MAP sensor. Learn More -
3-pin Metri-pak connector pre-wired for Honeywell map sensor
SKU:02-177
Excl. Tax: £6.00 Incl. Tax: £7.203-pin Metri-pak connector for Honeywell MAP sensor pre-terminated on 50cm of wire. Learn More -
Bracket for Honeywell MAP sensor
SKU:02-178
Excl. Tax: £5.00 Incl. Tax: £6.00Bracket for Honeywell MAP sensor Learn More -
High Tension Ignition leads
SKU:03-010
Excl. Tax: £0.00 Incl. Tax: £0.00High Tension Ignition leads. Made to order to your specs. Learn More -
2-pin Metri-pack 150.2 connector
SKU:02-063
Excl. Tax: £2.95 Incl. Tax: £3.542-pin Metri-pack 150.2 connector with terminals. Learn More -
Black Bullet Fuel Filter 8mm - 8mm (push on) with mounting clips, 10 Micron
SKU:04-051
Excl. Tax: £55.06 Incl. Tax: £66.07SYTEC Bullet High Flow 8mm-8mm (Black) designed for in line application. These filters have a flow capacity of 500 Ltr/Hr and are capable of handling up to 10 Bar pressure. These filters are designed for use in either a Pre or Post fuel pump format and in both carburettor (Low Pressure) or fuel injection (High Pressure) fuel systems. Learn More
