Search results for 'rover k'

10 Item(s)

per page

Set Ascending Direction
  1. LSU 4.9 wideband lambda extension 100cm

    LSU 4.9 wideband lambda extension

    SKU:01-lam-ext

    Starting at: Excl. Tax: £25.00 Incl. Tax: £30.00

    Extension for use with LSU 4.9 wideband lambda sensor. Compatible with our Bosh or 14Point7 sensors. Learn More
  2. Emerald ECU to OBD, Serial port and 2 CAN breakout loom/adapter.

    Emerald ECU to OBD, Serial port and 2 CAN breakout loom/adapter.

    SKU:02-180

    Excl. Tax: £34.50 Incl. Tax: £41.40

    Emerald ECU to OBD and serial port breakout loom/adapter for connecting OBD devices to the K3 or K6 ECU. Allows for OBD and PC serial links at the same time. Learn More
  3. 2-way Dashboard switch with button for Emerald ECU

    2-way Dashboard map switch with button

    SKU:05-map-switch-button

    Starting at: Excl. Tax: £34.00 Incl. Tax: £40.80

    2-way Dashboard switch with knob, prewired with ECU aux port plug, resistor and push button for 3rd map selection. Learn More
  4. 2-way Dashboard switch with key for Emerald ECU

    2-way Dashboard switch with key

    SKU:05-map-switch-key

    Starting at: Excl. Tax: £30.00 Incl. Tax: £36.00

    2-way Dashboard switch with knob, prewired with resistor, ECU aux port plug, plus "Key switch" selection of 3rd map. Learn More
  5. 3-way Dashboard map switch for Emerald ECU

    3-way Dashboard switch prewired with ECU aux port plug

    SKU:05-map-switch

    Starting at: Excl. Tax: £24.00 Incl. Tax: £28.80

    Quality 3-way Dashboard switch prewired with ECU aux port plug. Learn More
  6. Flying lead harness (loom) with Emerald ECU plug and extra pins

    DBW flying lead looms on ECU plugs - open ends for sensors, etc

    SKU:02-fly-DBW

    Starting at: Excl. Tax: £75.00 Incl. Tax: £90.00

    Drive by wire flying lead looms on ECU plugs – 3 meters long with unterminated ends so a wide variety of connectors/sensors can be fitted. Mandatory wires are pre-installed into the ECU plug, all other wires are supplied, pre-terminated at the ECU end, for you to select and install as per your engine's requirements. Learn More
  7. Emerald ECU to CAN and Serial breakout loom

    Emerald ECU to CAN/Serial breakout loom

    SKU:02-068

    Excl. Tax: £24.50 Incl. Tax: £29.40

    To allow simultaneous connection of Comms lead and CAN bus enabled devices to our ECU. Learn More
  8. Emerald OBD/serial breakout loom

    Emerald ECU to OBD and Serial breakout loom/adapter.

    SKU:02-056

    Excl. Tax: £24.50 Incl. Tax: £29.40

    Emerald ECU to OBD and serial port breakout loom/adapter for connecting OBD devices to the K3 or K6 ECU. Allows for OBD and PC serial links at the same time. Learn More
  9. Flying lead harness (loom) with Emerald ECU plug and extra pins

    Flying lead looms on ECU plugs - open ends for sensors, etc

    SKU:02-fly-loom

    Starting at: Excl. Tax: £70.00 Incl. Tax: £84.00

    Flying lead looms on ECU plugs – 3 meters long with unterminated ends so a wide variety of connectors/sensors can be fitted. Mandatory wires are pre-installed into the ECU plug, all other wires are supplied, pre-terminated at the ECU end, for you to select and install as per your engine's requirements. Learn More
  10. Emerald ECU Serial communications lead

    2 meter Emerald ECU Serial communications lead

    SKU:01-006

    Excl. Tax: £20.50 Incl. Tax: £24.60

    Emerald ECU serial communications lead. Learn More

10 Item(s)

per page

Set Ascending Direction