Search results for '8 injector'
-
Injector ballast resistor 2.7 Ohm
SKU:04-003
Excl. Tax: £3.50 Incl. Tax: £4.20Injector ballast resistor 2.7 Ohm. Learn More -
Injector pocket plug IPP02
SKU:04-024
Excl. Tax: £12.00 Incl. Tax: £14.40Injector pocket plug IPP02. A bung for sealing and blanking unused injector positions - recommended for testing and not as a permanent solution. Learn More -
Weld on Fuel injector bosses
SKU:04-011
Excl. Tax: £14.95 Incl. Tax: £17.94Weld on Fuel injector bosses. Learn More -
Injector ballast resistor 5 Ohm
SKU:04-004
Excl. Tax: £3.50 Incl. Tax: £4.20Injector ballast resistor 5 Ohm. Learn More -
Emerald's trigger wheel kit for Rover V8
SKU:05-040
Excl. Tax: £150.00 Incl. Tax: £180.00Emerald's 36-1 trigger wheel kit for Rover V8 (Serpentin/ribbed belt). Learn More -
AT911 Porsche Head Temp sensor adapter
SKU:05-038
Excl. Tax: £35.00 Incl. Tax: £42.00Out of stock
AT911 Porsche Head Temp body Learn More -
Ford Pinto 36-1 trigger wheel kit
SKU:05-037
Excl. Tax: £166.18 Incl. Tax: £199.42Out of stock
Complete kit with all parts needed to fit a crank sensor to the Ford Pinto engine. Includes genuine Marelli crank sensor, wheel, bracket and all nuts, bolts, spacers etc required. Learn More -
Ford Crossflow 36-1 trigger wheel kit
SKU:05-036
Excl. Tax: £166.18 Incl. Tax: £199.42Out of stock
Complete kit with all parts needed to fit a crank sensor to the Ford Crossflow engine. Includes genuine Marelli crank sensor, wheel, bracket and all nuts, bolts, spacers etc required. Learn More -
Vacuum hose 4mm
SKU:06-081
Excl. Tax: £1.50 Incl. Tax: £1.80Vacuum hose 4mm. Sold by meter. Learn More -
Air Control Valve kit 6 Ports
SKU:06-079
Excl. Tax: £86.00 Incl. Tax: £103.20A kit of parts to adapt from a 19mm pipe to supply idle air to set of 3 twin throttle bodies or any six port manifold with suitable tapping's. Learn More -
Bracket for Honeywell MAP sensor
SKU:02-178
Excl. Tax: £5.00 Incl. Tax: £6.00Bracket for Honeywell MAP sensor Learn More -
Cap Head bolt set M8
SKU:05-025
Excl. Tax: £5.50 Incl. Tax: £6.60Set of 10 M8 stainless steel cap head bolts. Learn More -
FSE Glencoe steel 8mm push-on Banjo & Cap Nut assembly
SKU:04-033
Excl. Tax: £8.40 Incl. Tax: £10.08Out of stock
FSE Glencoe steel 8mm push-on Banjo & Cap Nut assembly. Learn More -
Jubilee clips for 8mm - 5/16" hose
SKU:04-032
Excl. Tax: £0.50 Incl. Tax: £0.60Out of stock
Jubilee clips for 8mm - 5/16" hose. Learn More -
High pressure fuel hose 8mm
SKU:04-031
Excl. Tax: £4.50 Incl. Tax: £5.40Out of stock
High pressure fuel hose 8mm Learn More -
Straight fuel rail/pump adapter
SKU:05-021
Excl. Tax: £4.50 Incl. Tax: £5.40Straight fuel rail/pump adapter 6JIC to 8mm push-on. Learn More -
90º fuel rail/pump adapter
SKU:05-020
Excl. Tax: £7.98 Incl. Tax: £9.5890º fuel rail/pump adapter 6JIC to 8mm push-on fitting Learn More -
Webcon 4-wire IACV (Idle Air Control Valve)
SKU:02-059
Excl. Tax: £80.80 Incl. Tax: £96.96Webcon 4-wire IACV (Idle Air Control Valve or Idle Speed Control Actuator). Learn More -
Aluminium fuel rail DIY kit
SKU:04-026
Excl. Tax: £63.85 Incl. Tax: £76.62Extruded 6063 Aluminium fuel rail with 10.2 mm bore which is correct for tapping to take M12 thread size. Choice of threaded M12x1.5 adapters in jic6 or pig-tails for hose/clips. Excellent for DIY fuel rail making. Requires further fabrication. Kit include: * Half a metre (50 cm) of aluminium fuel rail * Set of 2 fittings of your choice Please note that this product is made to order. Learn More -
Lambda boss plug M18 x 1.5 – mild steel
SKU:05-011
Excl. Tax: £6.00 Incl. Tax: £7.20Lambda boss plug M18 x 1.5 – mild steel. Seize resistant when used with Stainless exhaust manifolds/systems. Learn More
