Search results for 'v tec'
-
Webcon billet adjustable fuel pressure regulator 0-5 bar
SKU:04-webconfpr
Starting at: Excl. Tax: £100.29 Incl. Tax: £120.35
Webcon adjustable billet fuel pressure regulator, 0-5 bar, push on or JIC-6 fittings. Learn More -
Ford Zetec 2.0L intake manifold gasket
SKU:06-084
Excl. Tax: £35.00 Incl. Tax: £42.00Ford Zetec 2.0L intake manifold gasket. Learn More -
Black Bullet Fuel Filter Jic6 with mounting clips, 10 Micron
SKU:04-052
Excl. Tax: £63.09 Incl. Tax: £75.71SYTEC Bullet High Flow Jic6 (Black) designed for in line application. These filters have a flow capacity of 500 Ltr/Hr and are capable of handling up to 10 Bar pressure. These filters are designed for use in either a Pre or Post fuel pump format and in both carburettor (Low Pressure) or fuel injection (High Pressure) fuel systems. Learn More -
ST170 Jenvey Manifold Ford Zetec TB45
SKU:06-082
Excl. Tax: £208.00 Incl. Tax: £249.60Pre-machined to fit ST170 engines. An inlet manifold to mount TB style throttle bodies to a Ford Zetec engine- not suitable for Carburettors due to angle. Learn More -
Vacuum hose 4mm
SKU:06-081
Excl. Tax: £1.50 Incl. Tax: £1.80Vacuum hose 4mm. Sold by meter. Learn More -
Air Control Valve kit 6 Ports
SKU:06-079
Excl. Tax: £76.00 Incl. Tax: £91.20Out of stock
A kit of parts to adapt from a 19mm pipe to supply idle air to set of 3 twin throttle bodies or any six port manifold with suitable tapping's. Learn More -
Black Bullet Fuel Filter 8mm - 8mm (push on) with mounting clips, 10 Micron
SKU:04-051
Excl. Tax: £51.94 Incl. Tax: £62.33SYTEC Bullet High Flow 8mm-8mm (Black) designed for in line application. These filters have a flow capacity of 500 Ltr/Hr and are capable of handling up to 10 Bar pressure. These filters are designed for use in either a Pre or Post fuel pump format and in both carburettor (Low Pressure) or fuel injection (High Pressure) fuel systems. Learn More -
Aptiv (Delphi) pins for Marelli Magneti IACV connector. Pack of 10.
SKU:02-153
Excl. Tax: £3.00 Incl. Tax: £3.60Magneti Marelli pins Learn More -
Blanking seal / Cavity plug
SKU:09-094
Excl. Tax: £3.40 Incl. Tax: £4.08Blanking seals/Cavity plugs for use with our ECU connector. Learn More -
Emerald K6 ECU P&P adapter - EU3 non VVC
SKU:02-148
Excl. Tax: £125.00 Incl. Tax: £150.00Emerald K6 ECU Plug & Play adapter - EU3. Learn More -
DBW flying lead looms on ECU plugs - open ends for sensors, etc
SKU:02-fly-DBW
Starting at: Excl. Tax: £75.00 Incl. Tax: £90.00
Drive by wire flying lead looms on ECU plugs – 3 meters long with unterminated ends so a wide variety of connectors/sensors can be fitted. Mandatory wires are pre-installed into the ECU plug, all other wires are supplied, pre-terminated at the ECU end, for you to select and install as per your engine's requirements. Learn More -
Emerald K6 ECU P&P adapter - VR6 (2.8 AAA, 2.9 ABV)
SKU:02-073
Excl. Tax: £125.00 Incl. Tax: £150.00Emerald K6 ECU Plug & Play adapter - VR6 (2.8 AAA, 2.9 ABV) Learn More -
Emerald K6 ECU P&P adapter - Ford 1.6/1.7 VVT
SKU:02-072
Excl. Tax: £125.00 Incl. Tax: £150.00Emerald K6 ECU Plug & Play adapter - Ford 1.6/1.7 VVT Learn More -
Jenvey Aluminium Air Horns for Heritage body
SKU:06-heritage-air-horns
Starting at: Excl. Tax: £39.00 Incl. Tax: £46.80
An aluminium spun air horn designed to suit the Jenvey Heritage Throttle Bodies with a retro look. These air horns available in variety of sizes with fixing bolts and schnoor locking washers. These are very light air horns! Learn More -
Heritage Twin Throttle Body 40 to 48mm Triple
SKU:06-074
Excl. Tax: £1,855.00 Incl. Tax: £2,226.00The Jenvey Heritage DCOE throttle body comes in TDT40 , TDT45 , TDT48 mm bore options. This is a triple twin throttle body set up to suit 6 cylinder engines. It includes a built in fuel rail, 350CC injectors, extension looms to bring the injector connector to the underside of the throttle body and a hidden internal throttle position sensor. Learn More -
Heritage Twin Throttle Body 40 to 48mm Pair
SKU:06-073
Excl. Tax: £1,294.00 Incl. Tax: £1,552.80The Jenvey Heritage DCOE throttle body comes in TDP40 , TDP45 , TDP48 mm bore options. This is a pair of twin throttle body set up to suit 4 cylinder engines. It includes a built in fuel rail, 350CC injectors, extension looms to bring the injector connector to the underside of the throttle body and a hidden internal throttle position sensor. Learn More -
Heritage Twin Throttle Body 40 to 48mm Single
SKU:06-072
Excl. Tax: £719.00 Incl. Tax: £862.80The Jenvey Heritage DCOE throttle body comes in TDS40 , TDS45 , TDS48 mm bore options. This is a single twin throttle body set up to suit 2 cylinder engines. It includes a built in fuel rail, 350CC injectors, extension looms to bring the injector connector to the underside of the throttle body and a hidden internal throttle position sensor. Learn More -
Pin removing tool for Emerald ECU connector
SKU:02-076
Excl. Tax: £3.20 Incl. Tax: £3.84For easy removal of pins from 36-way Econoseal connector. Supplied with instructions. Learn More -
Throttle cable 3 meter (supplied to order) SKU:06-071
SKU:06-071
Excl. Tax: £23.00 Incl. Tax: £27.60Jenvey throttle cable 3 meter length. Learn More -
Throttle cable 1.5 meter SKU:06-070
SKU:06-070
Excl. Tax: £11.00 Incl. Tax: £13.20Out of stock
Jenvey throttle cable 1.5 meter length. Learn More
