Search results for 'm3d'
-
Emerald ECU to OBD, Serial port and 2 CAN breakout loom/adapter.
SKU:02-180
Excl. Tax: £34.50 Incl. Tax: £41.40Emerald ECU to OBD and serial port breakout loom/adapter for connecting OBD devices to the K3 or K6 ECU. Allows for OBD and PC serial links at the same time. Learn More -
High Tension Ignition leads
SKU:03-010
Excl. Tax: £0.00 Incl. Tax: £0.00High Tension Ignition leads. Made to order to your specs. Learn More -
Wideband lambda (controller only)
SKU:01-097
Excl. Tax: £70.00 Incl. Tax: £84.00Out of stock
Wideband lambda controller only Learn More -
2-way Dashboard map switch with button
SKU:05-map-switch-button
Starting at: Excl. Tax: £30.00 Incl. Tax: £36.00
2-way Dashboard switch with knob, prewired with ECU aux port plug, resistor and push button for 3rd map selection. Learn More -
2-way Dashboard switch with key
SKU:05-map-switch-key
Starting at: Excl. Tax: £30.00 Incl. Tax: £36.00
2-way Dashboard switch with knob, prewired with resistor, ECU aux port plug, plus "Key switch" selection of 3rd map. Learn More -
3-way Dashboard switch prewired with ECU aux port plug
SKU:05-map-switch
Starting at: Excl. Tax: £20.00 Incl. Tax: £24.00
Quality 3-way Dashboard switch prewired with ECU aux port plug. Learn More -
Emerald K6 ECU P&P adapter - EU3 non VVC
SKU:02-148
Excl. Tax: £125.00 Incl. Tax: £150.00Emerald K6 ECU Plug & Play adapter - EU3. Learn More -
Emerald ECU Serial communications lead
SKU:01-COMMS-leads
Starting at: Excl. Tax: £20.50 Incl. Tax: £24.60
Emerald ECU serial communications lead. Learn More -
DBW flying lead looms on ECU plugs - open ends for sensors, etc
SKU:02-fly-DBW
Starting at: Excl. Tax: £75.00 Incl. Tax: £90.00
Drive by wire flying lead looms on ECU plugs – 3 meters long with unterminated ends so a wide variety of connectors/sensors can be fitted. Mandatory wires are pre-installed into the ECU plug, all other wires are supplied, pre-terminated at the ECU end, for you to select and install as per your engine's requirements. Learn More -
Diode
SKU:01-030
Excl. Tax: £2.00 Incl. Tax: £2.40Diode for preventing back feeding where necessary. Learn More -
Emerald K6 ECU P&P adapter - VR6 (2.8 AAA, 2.9 ABV)
SKU:02-073
Excl. Tax: £125.00 Incl. Tax: £150.00Emerald K6 ECU Plug & Play adapter - VR6 (2.8 AAA, 2.9 ABV) Learn More -
Emerald K6 ECU P&P adapter - Ford ST150
SKU:02-030
Excl. Tax: £125.00 Incl. Tax: £150.00Emerald K6 ECU Plug & Play adapter - Ford ST150 Learn More -
Emerald K6 ECU P&P adapter - Ford 1.6/1.7 VVT
SKU:02-072
Excl. Tax: £125.00 Incl. Tax: £150.00Emerald K6 ECU Plug & Play adapter - Ford 1.6/1.7 VVT Learn More -
Emerald K6 ECU P&P adapter - R32 (ME 7.1.1, DBW)
SKU:02-071
Excl. Tax: £145.00 Incl. Tax: £174.00Emerald K6 ECU Plug & Play adapter - R32 (ME 7.1.1, DBW) Learn More -
Emerald K6 ECU P&P adapter - 1.8T (ME 7.5, DBW)
SKU:02-070
Excl. Tax: £145.00 Incl. Tax: £174.00A plug and play adapter to allow direct fitment of our K6 ECU to 1.8T (ME 7.5, DBW) engined cars. Learn More -
Pin removing tool for Emerald ECU connector
SKU:02-076
Excl. Tax: £3.20 Incl. Tax: £3.84For easy removal of pins from 36-way Econoseal connector. Supplied with instructions. Learn More -
Emerald ECU to CAN/Serial breakout loom
SKU:02-068
Excl. Tax: £24.50 Incl. Tax: £29.40Out of stock
To allow simultaneous connection of Comms lead and CAN bus enabled devices to our ECU. Learn More -
Wideband lambda kit
SKU:01-100
Excl. Tax: £135.00 Incl. Tax: £162.00Out of stock
Wideband lambda kit Learn More -
Emerald wiring harness/loom extension
SKU:02-061
Excl. Tax: £85.00 Incl. Tax: £102.00Extension for Emerald's full wiring loom/harness. May suit those who want to relocate their ECU without having to buy a new loom, to save time and to avoid hassle of reinstalling the whole engine loom. Learn More -
Emerald ECU to OBD and Serial breakout loom/adapter.
SKU:02-056
Excl. Tax: £24.50 Incl. Tax: £29.40Emerald ECU to OBD and serial port breakout loom/adapter for connecting OBD devices to the K3 or K6 ECU. Allows for OBD and PC serial links at the same time. Learn More