Search results for 'ford ignition coil plug'
-
Ford Duratec coil-on-plug 2-pin connector
SKU:02-057
Excl. Tax: £2.50 Incl. Tax: £3.00Out of stock
Ford Duratec coil-on-plug 2-pin connector Learn More -
Ford (late gen.) coil pack plug & pins - 4cyl
SKU:02-006
Excl. Tax: £5.00 Incl. Tax: £6.00Connector for use with original Ford coil pack. Used on some Duratec and Sigma engines. Supplied with pins and seals. Learn More -
Ford Gen2 coil pack plug & pins - 6cyl
SKU:02-018
Excl. Tax: £7.50 Incl. Tax: £9.00Connector for use with 6cyl Ford Gen2 coil packs with pins and seals. Learn More -
Ford Gen2 coil pack plug & pins - 4cyl
SKU:02-017
Excl. Tax: £8.25 Incl. Tax: £9.90Connector for use with 4cyl Ford gen2 coil packs with pins and seals. Used on some Duratec and Zetec engines. Learn More -
Emerald K6 ECU P&P adapter - Ford 1.6/1.7 VVT
SKU:02-072
Excl. Tax: £125.00 Incl. Tax: £150.00Emerald K6 ECU Plug & Play adapter - Ford 1.6/1.7 VVT Learn More -
External Ignition Module
SKU:03-ign-mod
Starting at: Excl. Tax: £59.00 Incl. Tax: £70.80
External Ignition Module for use with our ECU. Learn More -
Ford Gen2 coil pack - 6cyl
SKU:03-002
Excl. Tax: £45.00 Incl. Tax: £54.00Ford Gen2 coil pack for 6 cylinder engines. Learn More -
Ford Gen2 coil pack - 4cyl
SKU:03-001
Excl. Tax: £39.95 Incl. Tax: £47.94Ford Gen2 coil pack for 4 cylinder engines. Learn More -
Ford Zetec 2.0L intake manifold gasket
SKU:06-084
Excl. Tax: £35.00 Incl. Tax: £42.00Ford Zetec 2.0L intake manifold gasket. Learn More -
ST170 Jenvey Manifold Ford Zetec TB45
SKU:06-082
Excl. Tax: £208.00 Incl. Tax: £249.60Pre-machined to fit ST170 engines. An inlet manifold to mount TB style throttle bodies to a Ford Zetec engine- not suitable for Carburettors due to angle. Learn More -
Ford Pinto 36-1 trigger disc kit
SKU:05-037
Excl. Tax: £135.79 Incl. Tax: £162.95Complete kit with all parts needed to fit a crank sensor to the Ford Pinto engine. Includes genuine Marelli crank sensor, disk, bracket and all nuts, bolts, spacers etc required. Learn More -
Ford Crossflow 36-1 trigger disc kit
SKU:05-036
Excl. Tax: £135.79 Incl. Tax: £162.95Complete kit with all parts needed to fit a crank sensor to the Ford Crossflow engine. Includes genuine Marelli crank sensor, disk, bracket and all nuts, bolts, spacers etc required. Learn More -
High Tension Ignition leads
SKU:03-010
Excl. Tax: £0.00 Incl. Tax: £0.00High Tension Ignition leads. Made to order to your specs. Learn More -
Blanking seal / Cavity plug
SKU:09-094
Excl. Tax: £3.40 Incl. Tax: £4.08Blanking seals/Cavity plugs for use with our ECU connector. Learn More -
3-way Dashboard switch prewired with ECU aux port plug
SKU:05-map-switch
Starting at: Excl. Tax: £20.00 Incl. Tax: £24.00
Quality 3-way Dashboard switch prewired with ECU aux port plug. Learn More -
Emerald K6 ECU P&P adapter - EU3 non VVC
SKU:02-148
Excl. Tax: £125.00 Incl. Tax: £150.00Emerald K6 ECU Plug & Play adapter - EU3. Learn More -
DBW flying lead looms on ECU plugs - open ends for sensors, etc
SKU:02-fly-DBW
Starting at: Excl. Tax: £75.00 Incl. Tax: £90.00
Drive by wire flying lead looms on ECU plugs – 3 meters long with unterminated ends so a wide variety of connectors/sensors can be fitted. Mandatory wires are pre-installed into the ECU plug, all other wires are supplied, pre-terminated at the ECU end, for you to select and install as per your engine's requirements. Learn More -
Superseal 6-pin male plug with pins
SKU:02-078
Excl. Tax: £4.30 Incl. Tax: £5.16Out of stock
Superseal 6-pin male connector including pins. Learn More -
Superseal 5-pin male plug with pins
SKU:02-042
Excl. Tax: £3.70 Incl. Tax: £4.44Superseal 5-pin male connector including pins. Learn More -
Emerald K6 ECU P&P adapter - Ford ST150
SKU:02-030
Excl. Tax: £125.00 Incl. Tax: £150.00Emerald K6 ECU Plug & Play adapter - Ford ST150 Learn More