Search results for '8 injector'
-
Injector ballast resistor 2.7 Ohm
SKU:04-003
Excl. Tax: £3.50 Incl. Tax: £4.20Injector ballast resistor 2.7 Ohm. Learn More -
Injector pocket plug IPP02
SKU:04-024
Excl. Tax: £11.00 Incl. Tax: £13.20Injector pocket plug IPP02. A bung for sealing and blanking unused injector positions - recommended for testing and not as a permanent solution. Learn More -
2-pin EV6/EV14/USCAR fuel injector connector, inc pins and seals
SKU:02-032
Excl. Tax: £2.50 Incl. Tax: £3.002-pin EV6/EV14/USCAR fuel injector connector, inc pins and seals. Learn More -
Weld on Fuel injector bosses
SKU:04-011
Excl. Tax: £14.25 Incl. Tax: £17.10Weld on Fuel injector bosses. Learn More -
Injector ballast resistor 5 Ohm
SKU:04-004
Excl. Tax: £3.50 Incl. Tax: £4.20Injector ballast resistor 5 Ohm. Learn More -
2-pin Junior mini timer plug
SKU:02-019
Excl. Tax: £3.40 Incl. Tax: £4.082-pin Junior mini timer plug for various sensors connection. Learn More -
Emerald's trigger wheel kit for Rover V8
SKU:05-040
Excl. Tax: £150.00 Incl. Tax: £180.00Emerald's 36-1 trigger wheel kit for Rover V8 (Serpentin/ribbed belt). Learn More -
VW/Audi 4-pin coil connector
SKU:02-188
Excl. Tax: £5.50 Incl. Tax: £6.60VW/Audi 4-pin coil connector with pins and seals. Learn More -
AT911 Porsche Head Temp sensor adapter
SKU:05-038
Excl. Tax: £35.00 Incl. Tax: £42.00Out of stock
AT911 Porsche Head Temp body Learn More -
Ford Zetec 2.0L intake manifold gasket
SKU:06-084
Excl. Tax: £35.00 Incl. Tax: £42.00Ford Zetec 2.0L intake manifold gasket. Learn More -
ECU 36-way male onboard connector
SKU:02-181
Excl. Tax: £15.00 Incl. Tax: £18.00ECU ECU 36-way male onboard connector. Learn More -
ST170 Jenvey Manifold Ford Zetec TB45
SKU:06-082
Excl. Tax: £299.00 Incl. Tax: £358.80Pre-machined to fit ST170 engines. An inlet manifold to mount TB style throttle bodies to a Ford Zetec engine- not suitable for Carburettors due to angle. Learn More -
Emerald ECU to OBD, Serial port and 2 CAN breakout loom/adapter.
SKU:02-180
Excl. Tax: £34.50 Incl. Tax: £41.40Out of stock
Emerald ECU to OBD and serial port breakout loom/adapter for connecting OBD devices to the K3 or K6 ECU. Allows for OBD and PC serial links at the same time. Learn More -
Ford Pinto 36-1 trigger disc kit
SKU:05-037
Excl. Tax: £158.27 Incl. Tax: £189.92Complete kit with all parts needed to fit a crank sensor to the Ford Pinto engine. Includes genuine Marelli crank sensor, disk, bracket and all nuts, bolts, spacers etc required. Learn More -
Ford Crossflow 36-1 trigger disc kit
SKU:05-036
Excl. Tax: £158.27 Incl. Tax: £189.92Complete kit with all parts needed to fit a crank sensor to the Ford Crossflow engine. Includes genuine Marelli crank sensor, disk, bracket and all nuts, bolts, spacers etc required. Learn More -
Vacuum hose 4mm
SKU:06-081
Excl. Tax: £1.50 Incl. Tax: £1.80Vacuum hose 4mm. Sold by meter. Learn More -
Air Control Valve kit 6 Ports
SKU:06-079
Excl. Tax: £81.00 Incl. Tax: £97.20A kit of parts to adapt from a 19mm pipe to supply idle air to set of 3 twin throttle bodies or any six port manifold with suitable tapping's. Learn More -
Black Bullet Fuel Filter 8mm - 8mm (push on) with mounting clips, 10 Micron
SKU:04-051
Excl. Tax: £55.06 Incl. Tax: £66.07SYTEC Bullet High Flow 8mm-8mm (Black) designed for in line application. These filters have a flow capacity of 500 Ltr/Hr and are capable of handling up to 10 Bar pressure. These filters are designed for use in either a Pre or Post fuel pump format and in both carburettor (Low Pressure) or fuel injection (High Pressure) fuel systems. Learn More -
Bracket for Honeywell MAP sensor
SKU:02-178
Excl. Tax: £5.00 Incl. Tax: £6.00Bracket for Honeywell MAP sensor Learn More -
8-pin Deutsch male connector
SKU:02-169
Excl. Tax: £7.95 Incl. Tax: £9.548-pin Deutsch male connector Learn More
