Search results for 'St170 on bike carbs'
-
ST170 Jenvey Manifold Ford Zetec TB45
SKU:06-082
Excl. Tax: £313.95 Incl. Tax: £376.74Pre-machined to fit ST170 engines. An inlet manifold to mount TB style throttle bodies to a Ford Zetec engine- not suitable for Carburettors due to angle. Learn More -
LSU 4.9 wideband lambda extension
SKU:01-lam-ext
Starting at: Excl. Tax: £25.00 Incl. Tax: £30.00
Extension for use with LSU 4.9 wideband lambda sensor. Compatible with our Bosh or 14Point7 sensors. Learn More -
Amphenol ATM (Deutsch DTM) connectors and terminals
SKU:02-ATM-Deutsch
Starting at: Excl. Tax: £1.90 Incl. Tax: £2.28
Variety of Deutsch DTM/Amphenol ATM compatible connectors and pins. Learn More -
Deutsch DT connectors and pins.
SKU:02-DT-Deutsch
Starting at: Excl. Tax: £1.90 Incl. Tax: £2.28
Variety of Deutsch DT connectors and pins. Learn More -
Gen2 4-cylinder coil pack connector pins & seals
SKU:02-245
Excl. Tax: £5.00 Incl. Tax: £6.00Terminals and seals to fit Gen2 4-cylinder connector. Learn More -
Gen2 6-cylinder coil pack connector pins & seals
SKU:02-247
Excl. Tax: £5.00 Incl. Tax: £6.00Terminals and seals to fit Gen2 6-cylinder connector. Learn More -
Emerald's Jaguar V12 IACV Conversion kit (OE Manifold)
SKU:01-023
Excl. Tax: £135.00 Incl. Tax: £162.00Out of stock
Jaguar V12 IACV Conversion kit (OE Manifold). Learn More -
VW/Audi 4-pin coil connector
SKU:02-188
Excl. Tax: £5.50 Incl. Tax: £6.60VW/Audi 4-pin coil connector with pins and seals. Learn More -
Webcon billet adjustable fuel pressure regulator 0-5 bar
SKU:04-webconfpr
Starting at: Excl. Tax: £105.30 Incl. Tax: £126.36
Webcon adjustable billet fuel pressure regulator, 0-5 bar, push on or JIC-6 fittings. Learn More -
Black Bullet Fuel Filter Jic6 with mounting clips, 10 Micron
SKU:04-052
Excl. Tax: £63.09 Incl. Tax: £75.71SYTEC Bullet High Flow Jic6 (Black) designed for in line application. These filters have a flow capacity of 500 Ltr/Hr and are capable of handling up to 10 Bar pressure. These filters are designed for use in either a Pre or Post fuel pump format and in both carburettor (Low Pressure) or fuel injection (High Pressure) fuel systems. Learn More -
ECU 36-way male onboard connector
SKU:02-181
Excl. Tax: £15.00 Incl. Tax: £18.00ECU ECU 36-way male onboard connector. Learn More -
Hi OTP017 Out-Tank Fuel Injection Pump (3 Bar)
SKU:04-012
Excl. Tax: £59.62 Incl. Tax: £71.54Hi OTP017 Out-Tank Fuel Injection Pump. Learn More -
Air Control Valve kit 6 Ports
SKU:06-079
Excl. Tax: £86.00 Incl. Tax: £103.20A kit of parts to adapt from a 19mm pipe to supply idle air to set of 3 twin throttle bodies or any six port manifold with suitable tapping's. Learn More -
Black Bullet Fuel Filter 8mm - 8mm (push on) with mounting clips, 10 Micron
SKU:04-051
Excl. Tax: £55.06 Incl. Tax: £66.07SYTEC Bullet High Flow 8mm-8mm (Black) designed for in line application. These filters have a flow capacity of 500 Ltr/Hr and are capable of handling up to 10 Bar pressure. These filters are designed for use in either a Pre or Post fuel pump format and in both carburettor (Low Pressure) or fuel injection (High Pressure) fuel systems. Learn More -
2-pin Metri-pack 150.2 connector
SKU:02-063
Excl. Tax: £2.95 Incl. Tax: £3.542-pin Metri-pack 150.2 connector with terminals. Learn More -
High Tension Ignition leads
SKU:03-010
Excl. Tax: £0.00 Incl. Tax: £0.00High Tension Ignition leads. Made to order to your specs. Learn More -
Bracket for Honeywell MAP sensor
SKU:02-178
Excl. Tax: £5.00 Incl. Tax: £6.00Bracket for Honeywell MAP sensor Learn More -
3-pin Metri-pak connector pre-wired for Honeywell map sensor
SKU:02-177
Excl. Tax: £6.00 Incl. Tax: £7.203-pin Metri-pak connector for Honeywell MAP sensor pre-terminated on 50cm of wire. Learn More -
3-pin Metri-pak connector for Honeywell map sensor
SKU:02-074
Excl. Tax: £4.50 Incl. Tax: £5.403-pin Metri-pak connector for Honeywell MAP sensor. Learn More -
Honeywell 3.44Bar MAP sensor
SKU:02-053
Excl. Tax: £63.50 Incl. Tax: £76.20Honeywell Manifold Absolute Pressure (MAP) sensor - 3.44Bar. Learn More
