Search results for 'zetec r'
-
Hi OTP017 Out-Tank Fuel Injection Pump (3 Bar)
SKU:04-012
Excl. Tax: £59.62 Incl. Tax: £71.54Hi OTP017 Out-Tank Fuel Injection Pump. Learn More -
Breather filter BF-19
SKU:07-030
Excl. Tax: £25.00 Incl. Tax: £30.00ITG foam crankcase breather. Fits on 19mm diameter tube. Includes retaining clip. Learn More -
Emerald ECU to OBD, Serial port and 2 CAN breakout loom/adapter.
SKU:02-180
Excl. Tax: £34.50 Incl. Tax: £41.40Emerald ECU to OBD and serial port breakout loom/adapter for connecting OBD devices to the K3 or K6 ECU. Allows for OBD and PC serial links at the same time. Learn More -
Ford Pinto 36-1 trigger wheel kit
SKU:05-037
Excl. Tax: £166.18 Incl. Tax: £199.42Out of stock
Complete kit with all parts needed to fit a crank sensor to the Ford Pinto engine. Includes genuine Marelli crank sensor, wheel, bracket and all nuts, bolts, spacers etc required. Learn More -
Ford Crossflow 36-1 trigger wheel kit
SKU:05-036
Excl. Tax: £166.18 Incl. Tax: £199.42Out of stock
Complete kit with all parts needed to fit a crank sensor to the Ford Crossflow engine. Includes genuine Marelli crank sensor, wheel, bracket and all nuts, bolts, spacers etc required. Learn More -
Air Control Valve kit 6 Ports
SKU:06-079
Excl. Tax: £86.00 Incl. Tax: £103.20A kit of parts to adapt from a 19mm pipe to supply idle air to set of 3 twin throttle bodies or any six port manifold with suitable tapping's. Learn More -
Black Bullet Fuel Filter 8mm - 8mm (push on) with mounting clips, 10 Micron
SKU:04-051
Excl. Tax: £55.06 Incl. Tax: £66.07SYTEC Bullet High Flow 8mm-8mm (Black) designed for in line application. These filters have a flow capacity of 500 Ltr/Hr and are capable of handling up to 10 Bar pressure. These filters are designed for use in either a Pre or Post fuel pump format and in both carburettor (Low Pressure) or fuel injection (High Pressure) fuel systems. Learn More -
2-pin Metri-pack 150.2 connector
SKU:02-063
Excl. Tax: £2.95 Incl. Tax: £3.542-pin Metri-pack 150.2 connector with terminals. Learn More -
High Tension Ignition leads
SKU:03-010
Excl. Tax: £0.00 Incl. Tax: £0.00High Tension Ignition leads. Made to order to your specs. Learn More -
Bracket for Honeywell MAP sensor
SKU:02-178
Excl. Tax: £5.00 Incl. Tax: £6.00Bracket for Honeywell MAP sensor Learn More -
3-pin Metri-pak connector pre-wired for Honeywell map sensor
SKU:02-177
Excl. Tax: £6.00 Incl. Tax: £7.203-pin Metri-pak connector for Honeywell MAP sensor pre-terminated on 50cm of wire. Learn More -
3-pin Metri-pak connector for Honeywell map sensor
SKU:02-074
Excl. Tax: £4.50 Incl. Tax: £5.403-pin Metri-pak connector for Honeywell MAP sensor. Learn More -
Honeywell 3.44Bar MAP sensor
SKU:02-053
Excl. Tax: £63.50 Incl. Tax: £76.20Honeywell Manifold Absolute Pressure (MAP) sensor - 3.44Bar. Learn More -
Injector ballast resistor 2.7 Ohm
SKU:04-003
Excl. Tax: £3.50 Incl. Tax: £4.20Injector ballast resistor 2.7 Ohm. Learn More -
2-pin Timer boot
SKU:02-175
Excl. Tax: £1.00 Incl. Tax: £1.20Rubber boot for use with 2-pin Timer connector. Learn More -
3-pin Timer boot
SKU:02-176
Excl. Tax: £1.50 Incl. Tax: £1.80Rubber boot for use with 3-pin Timer connector. Learn More -
Timer pins. Pack of 10.
SKU:02-174
Excl. Tax: £2.50 Incl. Tax: £3.00Terminals for use with 2-pin and 3-pin Timer connectors. Learn More -
Wideband lambda (controller only)
SKU:01-097
Excl. Tax: £75.00 Incl. Tax: £90.00Out of stock
Wideband lambda controller only Learn More -
Aptiv (Delphi) pins for Marelli Magneti IACV connector. Pack of 10.
SKU:02-153
Excl. Tax: £3.00 Incl. Tax: £3.60Magneti Marelli pins Learn More -
5-pin Power Timer connector kit
SKU:02-152
Excl. Tax: £4.90 Incl. Tax: £5.885-pin Power Timer connector kit. Learn More
