Search results for: 'zetec r'

Aptiv (Delphi) pins for Marelli Magneti IACV connector. Pack of 10.

SKU:02-153

Excl. Tax: £3.00 Incl. Tax: £3.60

Magneti Marelli pins Learn More

Add to Wishlist

Wideband lambda (controller only)

SKU:01-097

Excl. Tax: £75.00 Incl. Tax: £90.00

Out of stock

Wideband lambda controller only Learn More

Add to Wishlist

Timer pins. Pack of 10.

SKU:02-174

Excl. Tax: £2.50 Incl. Tax: £3.00

Terminals for use with 2-pin and 3-pin Timer connectors. Learn More

Add to Wishlist

3-pin Timer boot

SKU:02-176

Excl. Tax: £1.50 Incl. Tax: £1.80

Rubber boot for use with 3-pin Timer connector. Learn More

Add to Wishlist

2-pin Timer boot

SKU:02-175

Excl. Tax: £1.00 Incl. Tax: £1.20

Rubber boot for use with 2-pin Timer connector. Learn More

Add to Wishlist

Injector ballast resistor 2.7 Ohm

SKU:04-003

Excl. Tax: £3.50 Incl. Tax: £4.20

Injector ballast resistor 2.7 Ohm. Learn More

Add to Wishlist

Honeywell 3.44Bar MAP sensor

SKU:02-053

Excl. Tax: £63.50 Incl. Tax: £76.20

Honeywell Manifold Absolute Pressure (MAP) sensor - 3.44Bar. Learn More

Add to Wishlist

3-pin Metri-pak connector for Honeywell map sensor

SKU:02-074

Excl. Tax: £4.50 Incl. Tax: £5.40

3-pin Metri-pak connector for Honeywell MAP sensor. Learn More

Add to Wishlist

3-pin Metri-pak connector pre-wired for Honeywell map sensor

SKU:02-177

Excl. Tax: £6.00 Incl. Tax: £7.20

3-pin Metri-pak connector for Honeywell MAP sensor pre-terminated on 50cm of wire. Learn More

Add to Wishlist

Bracket for Honeywell MAP sensor

SKU:02-178

Excl. Tax: £5.00 Incl. Tax: £6.00

Bracket for Honeywell MAP sensor Learn More

Add to Wishlist

High Tension Ignition leads

SKU:03-010

Excl. Tax: £0.00 Incl. Tax: £0.00

High Tension Ignition leads. Made to order to your specs. Learn More

Add to Wishlist

2-pin Metri-pack 150.2 connector

SKU:02-063

Excl. Tax: £2.95 Incl. Tax: £3.54

2-pin Metri-pack 150.2 connector with terminals. Learn More

Add to Wishlist

Black Bullet Fuel Filter 8mm - 8mm (push on) with mounting clips, 10 Micron

SKU:04-051

Excl. Tax: £55.06 Incl. Tax: £66.07

SYTEC Bullet High Flow 8mm-8mm (Black) designed for in line application. These filters have a flow capacity of 500 Ltr/Hr and are capable of handling up to 10 Bar pressure. These filters are designed for use in either a Pre or Post fuel pump format and in both carburettor (Low Pressure) or fuel injection (High Pressure) fuel systems. Learn More

Add to Wishlist

Air Control Valve kit 6 Ports

SKU:06-079

Excl. Tax: £86.00 Incl. Tax: £103.20

A kit of parts to adapt from a 19mm pipe to supply idle air to set of 3 twin throttle bodies or any six port manifold with suitable tapping's. Learn More

Add to Wishlist

Ford Crossflow 36-1 trigger wheel kit

SKU:05-036

Excl. Tax: £166.18 Incl. Tax: £199.42

Out of stock

Complete kit with all parts needed to fit a crank sensor to the Ford Crossflow engine. Includes genuine Marelli crank sensor, wheel, bracket and all nuts, bolts, spacers etc required. Learn More

Add to Wishlist

Ford Pinto 36-1 trigger wheel kit

SKU:05-037

Excl. Tax: £166.18 Incl. Tax: £199.42

Out of stock

Complete kit with all parts needed to fit a crank sensor to the Ford Pinto engine. Includes genuine Marelli crank sensor, wheel, bracket and all nuts, bolts, spacers etc required. Learn More

Add to Wishlist

Emerald ECU to OBD, Serial port and 2 CAN breakout loom/adapter.

SKU:02-180

Excl. Tax: £34.50 Incl. Tax: £41.40

Emerald ECU to OBD and serial port breakout loom/adapter for connecting OBD devices to the K3 or K6 ECU. Allows for OBD and PC serial links at the same time. Learn More