Subscribe to RSS Feed
Accessories
Other accessories to accompany our standalone aftermarket K6 ECU and for general use.
-
-
Diode
SKU:01-030
Excl. Tax: £2.00 Incl. Tax: £2.40Diode for preventing back feeding where necessary. Learn More -
Cap Head bolt set M8
SKU:05-025
Excl. Tax: £5.50 Incl. Tax: £6.60Set of 10 M8 stainless steel cap head bolts. Learn More -
Synchrometer for carburettor / throttle body balancing
SKU:04-035
Excl. Tax: £46.95 Incl. Tax: £56.34Out of stock
Synchrometer 1-30 kgh for carburettor / throttle body balancing. Learn More -
Injector ballast resistor
SKU:04-004
Excl. Tax: £2.50 Incl. Tax: £3.00Injector ballast resistor. Learn More -
Tacho driver
SKU:05-007
Excl. Tax: £30.00 Incl. Tax: £36.00Tacho driver to allow older style moving coil type tachometers to be controlled by our ECU. Learn More -
Pipercross air filter clean & recondition kit C9000
SKU:07-006
Excl. Tax: £12.65 Incl. Tax: £15.18Pipercross air filter clean & recondition kit C9000. Learn More -
Weld on Fuel injector bosses
SKU:04-011
Excl. Tax: £11.50 Incl. Tax: £13.80Weld on Fuel injector bosses. Learn More -
2-pin EV6/EV14/USCAR to 2-pin Junior mini timer connector adapter
SKU:04-023
Excl. Tax: £3.50 Incl. Tax: £4.202-pin EV6/EV14/USCAR to 2-pin Junior mini timer connector adapter for using 2-pin mini timer plug on Bosch EV14 injectors and other various installations. Learn More -
Injector pocket plug IPP02
SKU:04-024
Excl. Tax: £7.30 Incl. Tax: £8.76Injector pocket plug IPP02. A bung for sealing and blanking unused injector positions - recommended for testing and not as a permanent solution. Learn More -
Aluminium fuel rail DIY kit
SKU:04-026
Excl. Tax: £35.00 Incl. Tax: £42.00Extruded 6063 Aluminium fuel rail with 10.2 mm bore which is correct for tapping to take M12 thread size. Choice of threaded M12x1.5 adapters in jic6 or pig-tails for hose/clips. Excellent for DIY fuel rail making. Requires further fabrication. Kit include: * Half a metre (50 cm) of aluminium fuel rail * Set of 2 fittings of your choice Please note that this product is made to order. Learn More -
Magneti Marelli 4-wire IACV (Idle Air Control Valve)
SKU:02-059
Excl. Tax: £52.35 Incl. Tax: £62.82Magneti Marelli 4-wire IACV (Idle Air Control Valve or Idle Speed Control Actuator). Learn More -
Alloy male/male fuel pump adapter
SKU:05-019
Excl. Tax: £4.00 Incl. Tax: £4.80Alloy male/male fuel pump adapter 6JIC to M12x1.5 Learn More -
Sytec Alloy JIC6 Banjo & Cap Nut Assembly
SKU:04-034
Excl. Tax: £13.80 Incl. Tax: £16.56Sytec Alloy JIC6 Banjo & Cap Nut Assembly for fitting Bosch fuel pump. Learn More -
FSE Glencoe steel 8mm push-on Banjo & Cap Nut assembly
SKU:04-033
Excl. Tax: £6.50 Incl. Tax: £7.80FSE Glencoe steel 8mm push-on Banjo & Cap Nut assembly. Learn More -
Jubilee clips for 8mm - 5/16" hose
SKU:04-032
Excl. Tax: £0.50 Incl. Tax: £0.60Jubilee clips for 8mm - 5/16" hose. Learn More -
High pressure fuel hose 8mm
SKU:04-031
Excl. Tax: £4.50 Incl. Tax: £5.40High pressure fuel hose 8mm Learn More -
Straight fuel rail/pump adapter
SKU:05-021
Excl. Tax: £4.50 Incl. Tax: £5.40Straight fuel rail/pump adapter 6JIC to 8mm push-on. Learn More -
90º fuel rail/pump adapter
SKU:05-020
Excl. Tax: £6.50 Incl. Tax: £7.8090º fuel rail/pump adapter 6JIC to 8mm push-on fitting Learn More -
Sytec Motorsport Fuel Pump Bracket inc Std Sleeve
SKU:04-015
Excl. Tax: £34.95 Incl. Tax: £41.94Sytec Motorsport Fuel Pump Bracket including Std Sleeve. Learn More
